发布于

Stencil Wiper Roll for DEK printer-DEK53040011A1

 

Size

 Plastic pivot diameter:    OD: 22.5mm ID: 19.8mm Notch Width: 3mm Notch Length: 5mm
 Overall size:
 Paper length: 11±0.5m

 

1.Paper material: Wood pulp non-woven fabric in white

2.Paper weight: 60g/m2

3.Cosmetic inspection

3.1 Clean

3.2 No lint and foreign material

3.3 Heat-shrink film has no damage

4.Function test

4.1 Liquid absorption: >400% paper volume

4.2 Liquid absorption speed: <1 sec for spreading 5cm distance

5. Compliance to ROHS

6. Roll weight: 295.7g

7. Package:

7.1 50 rolls/Box,  about 15.8kg/box

7.2 Box size: L550*W430*H370mm

 

发布于

Stencil Wiper Roll for DEK Printer -DEK53030011A1

 

Size

 Plastic pivot diameter:    OD: 22.5mm ID: 19.8mm Notch Width: 3mm Notch Length: 5mm
 Overall size:
 Paper length: 11±0.5m

 

1.Paper material: Wood pulp non-woven fabric in white

2.Paper weight: 60g/m2

3.Cosmetic inspection

3.1 Clean

3.2 No lint and foreign material

3.3 Heat-shrink film has no damage

4.Function test

4.1 Liquid absorption: >400% paper volume

4.2 Liquid absorption speed: <1 sec for spreading 5cm distance

5. Compliance to ROHS

6. Roll weight: 230g

7. Package:

7.1 50 rolls/Box,  about 12.4kg/box

7.2 Box size: L560*W430*H380mm

 

发布于

Pin Insertion Machine(for press-fit-in parts)-HW-PF30

 

No. Air Pressure Gage Head Pressing Force
1 0.1~0.2MPa 1800~3880 N
2 0.2~0.3MPa 3880~5500N
3 0.3~0.4MPa 5500~7500N
4 0.4~0.5MPa 7500~9500N
5 0.5~0.6MPa 9500~11450N
6 0.6~0.7MPa 11450~12900N

 

1.Air supply: 0.6~0.8MPa

2.Max. pressure: 12000N

3.Max. working range with pressure: 80mm

4.Distance from head to table: 20~100mm adjustable

5.Movement range: adjust nut according to product and tooling

6.Table: #45 steel plated with Cr, 600(L)*450(W)*12(H)mm

7.Center of head to arm:300mm

8.PCBA: from part to PCB edge, max. 300mm; length is not limited

9.Machine size &weight: 600(W)X750(D)X1000(H)mm, 130kg

10.Table size &weight: 600(W)X850(D)*754(H)mm, 70kg

11.able levelness vs. head:

–0~0.03mm in X direction, 0~0.05mm in Y direction

发布于

Stencil Wiper Roll for MPM printer-MPM45540011A1

 

Size

 Plastic pivot diameter: OD: 23.2mm ID1: 21mm   ID2: 19.8mm
 Overall size:
 Paper length: 11±0.5m

 

1.Paper material: Wood pulp non-woven fabric in white

2.Paper weight: 60g/m2

3.Cosmetic inspection

3.1 Clean

3.2 No lint and foreign material

3.3 Heat-shrink film has no damage

4.Function test

4.1 Liquid absorption: >400% paper volume

4.2 Liquid absorption speed: <1 sec for spreading 5cm distance

5. Compliance to ROHS

6. Roll weight: 291.2g

7. Package:

7.1 50 rolls/Box,  about 15.5kg/box

7.2 Box size: L560*W470*H320mm

 

发布于

Chopping Style of PCB Cutter-HW-F200

 

 Description Specification
 V-cut depth  1/3 of PCB thickness
 Max.PCB width  4~100mm for sub-boards of one big panel
 Cutting length  Max.360mm
 Cutter material  Hight quality high speed steel
 Cutter size  360(L)*43.5(H)*6(Thickness)mm
 Stress  Low cutting stress,typically about 200μST
 Power supply  220VAC,100W
 Weight  130kg, excluding trolley in the picture
 Size  700(L)*325(W)*400(W)mm, excluding trolley in the picture
发布于

SMD Carrier Tape Peeling Force Tester-HW-12

 

1.Match with EIA-481 peeling strength testing requirements,design and manufacturing standars.

2.Manual or PC control.

3.The test result can’t be modified,highly credible.

4.Peel force is displayed on LCD.

5.Intelligent design includes real time data display,tolerance setting and juding automatically.

6.Data is stored and traceable.

7.Use Japan IMADA(500G) tensile test head to guarantee the test accuracy.

8.No data transmissioe error.

发布于

Semi-Auto SMD Component Taping Machine-HW-1010

Features

1.Fine running head is installed and sealing  position accuracy can be controlled within ±.01mm.

2.Equipped with dual PID temperature controller.

3.Sealing position and tension are adjustable for cover tape.

  1. Tape sealing speed is adjustable in continuous moving mode and step moving mode.
  2. Compatible with all EIA-481 standard platic rells.
发布于

BGA Rework Station-B651

Features

  1. 1.Camera image eases BGA and PCB Pads alignment.
  2. 2.Auto BGA removal and soldering.
  3. 3.8stages are programmable to achieve optimal profile.
  4. 4.Real time profile is visible and adjustable.
  5. 5.Independent heating modules(top & bottom ),PID algorithm and close-loop control make temperature more even and accurate.
  6. 6.CE Certificated.

 

Product Applied

 

发布于

First Article Inspection System-F500

 

In electronics assembly manufacturing, production people have to change over frequently between products of different models with small volume, Traditional FAI(First Article Inspection) is using LCR to manually measure and Verify the components one by one, It takes long time but human errors happen from time to time,F500 is an efficient and effective inspection system to mitigate the situation. It combined measurement hardware and user friendly application software. The userjust follows the wizard and check step by step . It takes only 30 miutes to inspect one boards(300 components/board)normally.

发布于

Semi-auto Screw Driving Machine-SD10

SD10 is the screw fastening solution of high performance,designed for mobile device assembly.It is composed of two active work tables,one electric screw driver and one screw feeder,with robust mechanical platform and reliable control system.

 

Features

1.Easy to operate and program.

2.Flexible tooling is for muliple products.

3. Robust and relible mechanical structure and electrical control components.

4.Hight quality Japan-brand screw feeder with efficient screw supply.

5.Failure proofing to avoid screw loosing,floating and missing.

 

发布于

Router-V300D

Programmble V300D is a high speed router with 4-axis serovcontrol.Peformance is good on scrap rate and milling quality. It is an economic solution to replace manual cutting or V-cut.

 

Features

 

  1. 1.Imported 60000rpm high speed spindle-long life&easy loading and unloading;
  2. 2.Warranty one year;
  3. 3.20X lens assure efficient and accurate teaching.
  4. 4.Equipped with anti-static device;
  5. 5.Excellent vacuum tool to collect dust;
  6. 6.Windows XP operation system;
  7. 7.Upload/download,edit/backup program,when machine connecting to network;
发布于

3D Solder Paste Inspection Machine-S8030

 

1.The use of PSLM combined with the PMP to achieve 100% high-precision solder paste 3D measurement in SMT production line,Using PSLM technology,changed the traditional way of generating 3D StrctLight,the traditional glass grating moire required mechanically driven by a piezoelectric motor(PZT).By using PSLM,no need glass grating and mechanical parts and more.The elimination of the mechanical drive and moving parts,greatly improving the ease of use and avoid mechanical wear and reduce maintenance costs.

 

2.By using the Stop&Catch methods combined with multiple image acquisition,realize highly repeatable 3D results on the solder paste measurement.Compared to conventional scanning just take one pictures only on the solder paste a sacan sampling,multiple image acquisition greatly enhancing the accuracy and reliable test results.

 

3.Patented D-Lighting technology achieves full light specturm detect  ability.It is perfect solution to solve the shadow effect and reduce noise interference during 3D measurement.

 

4.Gerber data conversion and import,achieve  automatic detection of the entire board .Manual”Teach”fuction realize user-fireendly programming and test job generation in case of no Genrber data situation.

 

5.The maxmum detectable height increased from the traditional 350um to 1200um,not only can detect solder paste,also applies to the detection of opaque objects such as red glue and black epoxy and other none transparent object.

 

6.Friendly and simple user interface,five minutes of programming and one key opeation.

 

7. Powerful “Statistical Process Control(SPC)”,provide a plenty of tools,user-friendly real-time monitoring,reduce defects caused by poor solder paste printing and improve final product quality.

 

 

发布于

3D Solder Paste Inspection Machine-S8080

 

1.The use of PSLM combined with the PMP to achieve 100% high-precision solder paste 3D measurement in SMT production line,Using PSLM technology,changed the traditional way of generating 3D StrctLight,the traditional glass grating moire required mechanically driven by a piezoelectric motor(PZT).By using PSLM,no need glass grating and mechanical parts and more.The elimination of the mechanical drive and moving parts,greatly improving the ease of use and avoid mechanical wear and reduce maintenance costs.

 

2.By using the Stop&Catch methods combined with multiple image acquisition,realize highly repeatable 3D results on the solder paste measurement.Compared to conventional scanning just take one pictures only on the solder paste a sacan sampling,multiple image acquisition greatly enhancing the accuracy and reliable test results.

 

3.Patented D-Lighting technology achieves full light specturm detect  ability.It is perfect solution to solve the shadow effect and reduce noise interference during 3D measurement.

 

4.Gerber data conversion and import,achieve  automatic detection of the entire board .Manual”Teach”fuction realize user-fireendly programming and test job generation in case of no Genrber data situation.

 

 

发布于

V-cut PCB cutting machine-VM600

Features

1.It cuts rapidly, high efficient in comparison with manual cutting.

2.It cuts with low stress, soldering joint quality get assured in comparison with manual cutting;

3.Equipped with touch screen;

4.PCB stays still and top blade moves which minimize stress;

5.Start cutting point can be set freely to prolong blade life time;

6.Cutting distance can be set freely;

7.It has counting function for production output;

8.Equipped with safety sensor;

9.Equipped with belt conveyor.

 
发布于

Router Machine with Milling Cutter-RM 285

1.Content
  1.Introduction and features
  2.Machine specification
  3.Main components
  4.Electrical design introduction
  5.Mechanical design introduction
  6. Output calculation

 

2. Introduction and features
 1.RM285 is a model of offline automatic router machine with milling cutter.
 2.Milling head and camera are located on Z axis. They move across the working area, driven by X/Y gantry, controlled by dedicated application software. The PCB is located in work table and doesn’tmove during cutting process.
 3. The milling cutter cuts the panel according to pre-set routine in program. It can cut in multiple patterns, including straight line, arc and circle.
 4.One operator should be available to load PCB panel and unload finished sub-boards during production.
 5. The camera can read 1D or 2D barcode for traceability.

发布于

Glue off the bubble machine-CEN3055

Features

1. Triple safety design,including latch,proximity switch and magnetic wire.

2. Compatible with most of the popular glue package.

3. LED display,light and buzzer alert make operation easy.

 

Specification

1.  Power:220V AC,50Hz,40W.

2. Rotation speed:3000 RPM.

3. Working capacity:30mlx2+15mlx2(accept customization).

4. Time setting:0.1~9.9Min.

5.Dimensions:390x390x200 mm(WxDxH).

6.Weight:33kg

发布于

Pneumatic Stencil Cleaning Machine(For large stencil cleaning)-SC3100

1.SC3100 is a fully pneumatic control and driving machine, used to clean stencil of solder paste or red glue printer. Special design for clean the stencil of LED, servo board.

2.SC3100 is very powerful on removing the solder paste or red glue from stencil – cleaning by spraying agents and then drying by air-blowing. It is a very useful and helpful tool for production people to perform regular cleaning.

 

 

1.Specially designed to clean stencils of solder paste and red glue printer.

2.User friendly to operate and maintain;

3.Flexible to operate with solvent-based, semi-aqueous or aqueous-based cleaning agents;

4.Pure pneumatic control and driving, eliminating safety risk from flammable liquids;

5.Machine body, piping and angle-seat valve, made of SUS304 stainless steel, are robust and anti-corrosive to chemical;

6.Equipped with 2 rotatory bars, spraying to clean and then air blowing from left and right sides;

7.Three-stage filtration enables cyclic utilization of cleaning agent;

8.Low position of exhaust exit and “S” shape of exhaust hose minimize loss of cleaning agent into the air.

发布于

Pneumatic Stencil Cleaning Machine- SC3000

Introduction

SC3000 is a completely pneumatically controlled and driven machine, used to clean solder paste stencil or red glue printer stencil.

SC3000 is very powerful on removing the solder paste or red glue from stencil – cleaning by praying cleaning agent and then drying by air-blowing. It is a very useful and helpful tool for production people to perform regular cleaning.

 

 

Features

  1. 1.Specially designed to clean stencils of solder paste and red glue printer.
  2. 2.User friendly to operate and maintain;
  3. 3.Flexible to operate with solvent-based, semi-aqueous or aqueous-based cleaning agents;
  4. 4.Completely controlled and driven pneumatically, eliminating safety risk from flammable liquids;
  5. 5.SUS304 stainless steel housing, robust and anti-corrosive to chemical;
    1.    5.1Equipped with 2 rotatory bars, spraying to clean and then air blowing from left and right sides;
    2.    5.2 Optimized rotatory mechanism enables higher but balanced spraying pressure than competitive machines;
    3.    5.3 High end pump and high capacity filter enable roaring liquid flow;
    4.    5.4 Three-stage filter enables cyclic utilization of cleaning agent;
  6. 6.Low position of exhaust exit and “S” shape of exhaust hose minimize loss of cleaning agent into the air.

 

Effectiveness of cleaning red glue

发布于

Squeegee &PCB cleaning machine-SQ10

Introduction

SQ10 is a fully pneumatic control and driving machine, used to clean squeegees of solder paste printer, misprinted PCB, fixtures and etc.

SQ10 is very powerful on removing the solder paste, flux, dust, oil residue or contamination on the products – cleaning by praying agents and then drying by air-blowing. It is a very useful and helpful tool for production people to perform regular cleaning.

 

Features

1.Mainly designed and used to clean squeegees and misprinted PCB, low volume of fixtures and etc.

2.User friendly and easy to operate;

3.Flexible to operate with solvent-based or aqueous-based cleaning agents;

4.Pure pneumatic control and driving, eliminating safety risk from flammable liquids;

5.Equipped with 2 rotatory bars, spraying to clean and then air blowing from top and bottom;

6.Compact design and SUS304 stainless steel structure which is robust and anti-corrosive to chemical;

6.1 Optimal nozzle distribution enables shadow-free spraying;

6.2 Mirror-surface wall enables quick liquid backflow from chamber to tank.

 7.High end pump and high capacity filter enable roaring liquid flow.

发布于

Electric cleaning machine- SC4000

Introduction

SC4000 is the electric cleaning machine for solder paste stencil, red glue stencil and misprinted PCB. Cleaning (by spraying hot aqueous agent), rinsing (by spraying hot DI water), drying (by blowing hot air) functions are integrated in stainless housing at compact size. It not only have excellent cleaning quality and efficiency, but also it is user and environment friendly.

 No  Item Specification
 1 Stencil size 750mm(L) ×750mm(W) × 40mm(H) or smaller
 2 Cleaning agent aqueous agent for cleaning, DI or tap water for rinsing
 3 Capacity of tank 50L max. X 2 pcs (for cleaning and rinsing respectively)
 4 Way of cleaning 4 fixed spraying bars, stencil moves forwards and     backwards by motor
 5 Way of rinsing Share 4 fixed spraying bards, spray DI water, stencil moves forwards and backwards by motors
 6 Way of drying 4 hot air blades, blowing hot air
 7 Recommended cleaning time 2~5 minutes
 8 Time between cleaning and rinsing 1 minute
 9 Recommended rinsing time 2~5 minutes

 

Effectiveness of cleaning red glue