发布于

Auto Nozzle Inspection machine-ANI 800

Specification

  No.  Description  Specification or explanation
 1  Function  Vision inspection for nozzle tip

Reading 2D code

Check vacuum reading
 2  Cycle time  1.5s/nozzle vision inspection, 3s/nozzle for vacuum checking
 3  Size  Tester body size: L570*W240*H530 mm

Exclude power supply and IPC computer
 4  Imaging system  1.3M pixels CCD and 280X zoom lens for industry
 5  Nozzle size  Height≤47mm, Max diameter≤10mm, nozzle tip≤2*2mm
 6  Nozzle brands  Fuji, Panasonic, ASM, Assembleon, Sony, Universal, Juki
 7  Capacity of nozzle carrier  24 nozzles for Fuji NXTI, NXTII and NXTIII machines
 8  Hardware brand  IPC (ADVANTECH), Monitor(DELL), Sensor (OMRON), Pneumatic parts (SMC), CCD (DAHENG IMAGING)
 9  Air supply  4-7Kg/cm2.
 10  Power supply  AC220±10V/50Hz,  about 1KW

 

Process

发布于

SMT Smart Shelf, Agilink-385,Agilink-580,Agilink-1440

SMT Smart Shelf  basic function

1.Store reels: use handheld device to scan reel, place it into any slot, where sensor can detect reel presence

2.Pick reels: place request by scanning bar codes (e.g. part number), import BOM list or select reels one by one in application software, led will be lit to indicate the location

3.Improper pick: alarm when one reel is taken away improperly.

4.Improper store: alarm when one reel is stored without scanning

5.Inventory status: reels, slots, incoming time information are displayed and can be downloaded as well

6.Power off memory

7.FIFO, partially-consumed material first out

8.Customization according to customer requirement, e.g. for MSD, alternative parts, expiry rules, banned rules,

 

 

 No. Description Standard  model Extended model High volume Model
 1  Typical Model  Agilink-385  Agilink-580  Agilink-1440
 2 Size (L*W*H, mm)  1680*330*1600  2730*330*1600  2200*450*1830
 3  Layer  5  5  7
 4  Capacity 385 slots (20mm pitch, for 7’’ reels) 520 slots (20mm pitch, for 7’’ reels)

52 slots (40mm pitch)

8 slots (60mm pitch)

 1440 slots (20mm pitch, for 7’’ reels), or customize
 5  Side Single Single Back to back
 6  Power 20W/220VAC 33W/220VAC 60W/220VAC
 7  High  precision Slot sensor  Yes  Yes  Yes
 8  Material  Aluminum alloy
 9  Network  WLAN or Ethernet
 10  Compatibility  Support connecting to MES and ERP system
 11  accessory  High speed scanner
发布于

Low Humidity Baking Oven -TADHE-650

1. Fastest dehumidifying performance with embedded CDA Deep Dehumidifying Control Unit, which enable fast drying when start working and recovery after door get open and closed;

2.Special designed for MSD floor life resetting according to IPC MSD handling requirement;

3.High accuracy &uniformity on temperature and humidity control;

4.Capable to sustain less than 5% RH in wide temperature range (35~125oC);

5.Hardware and software protection & alarm;

6.Antistatic protection and grounding;

7.CBI NGU Modular available, designed for anti-oxidation baking process;

8.MSD (moisture sensitive device), if floor life expires, should be baked at either 125oC or below 90oC &5%RH according to IPC /JEDEC-S-033.

9.Used for anti-oxidation baking process, N2 purging system will automatically start when temperature is greater 150oC, which is optional.

 

 No.  Description  Specification
 1  Temperature range  +35oC to +250oC
 2  Relative Humidity  Room RH to less than 5% RH (when Temp<125oC）
 3  Capacity  800(W)*800(W)*1000(H)mm, less than 650L
 4  Fast dehumidifier  CBI differential pressure type of macromolecule filter module
 5  Dehumidifying rate  15~20 minutes (from 60% to less than 5% RH)
 6  Recovery rate  5~15 minutes  to recover 5%RH after door gets open and closed
 7  Temp. &RH fluctuation  ≤ ±1oC, ≤2% RH
 8  Temp. &RH uniformity  ≤ ±2.5% for temperature, ≤3%~5%RH
 9  RH sensor  150oC compatible humidity sensor

(Remove the sensor when baking temperature is greater  150oC)